Bikemaster Drag Bar Installation

I never liked the stock bars - too high, and chrome. After some research and recommendations from the helpful folks at maximum-suzuki.com, I decided on bars from Bikemaster. They're dirt cheap and decent quality. I bought the Superbike bars and also the drag bar, to compare after some test fitting. I went with the drag bar as I really wanted the lowest position I could get - as close to the sportbikes that I am used to.

Test fit on the drag bar. Nice!	No clearance issues.
The Superbike is similar to stock, but about an inch lower.	Again, no issues on hitting the tank with this bar either.
Side view to give a better idea of what the Superbike bar would feel like when riding.	A side view of the drag bar (installed). Note the new 12V power outlet installed in the side fairing on the previous night. (I should point out that I cut almost an inch off of both ends of the new bar.)
Drag bar, fully installed.	A quick comparo shot between stock and the new drag bar.

Back to the Main Page